找仪器

MinusK LC-4超紧凑型隔振器

上海频标科技有限公司

企业性质一般经销商

入驻年限第4年

营业执照已审核
同类产品光学平台与隔振系统(7件)


Low frequency vibration isolator for weight loads from 15 to 130 lbs. and 1/2 Hz performance vertical and horizontal.

Minus K’s LC-4 is an ultra compact, low-frequency negative-stiffness isolator. It comes in two configurations, our low horizontal frequency performance of 1.5 Hz or our ultra low horizontal frequency performance of 0.5 Hz. Both configurations offer our signature 0.5 Hz vertical natural frequency.

The LC-4 isolators can be combined into multi isolator systems to support heavier payloads while taking up very little room themselves. The isolators are passive, manually-adjustable and require no air or electricity.

If needed, the LC-4 isolators can be customized to achieve user specific needs. Eg., different horizontal and vertical frequencies, damping, etc. They can also be made cleanroom and vacuum compatible.


LC-4 Isolator:

The curves below shows the 1/2 Hz performance of the LC-4. It offers 10-100 times better performance than an air table.







Weight: Approximately 7 lb (3.1 kg)

Low Frequency Horizontal (LC-4)

Dimensions:
4.75" W x 4.75" D x 7" H
(121mm W x 121mm D x 178mm H)

Load Capacities (approximate):
ModelPayload Range*
25LC-4
12 - 25 lb 
(5.4 - 11.3 kg)
35LC-4
25 - 35 lb 
(11.3 - 15.8 kg)
50LC-4
36 - 55 lb 
(16.3 - 25 kg)
70LC-4
50 - 70 lb 
(22.6 - 31.7 kg)
100LC-4
75 - 100 lb 
(34 - 45.3 kg)

125LC-4

95 - 130 lb 
(43 - 59 kg)

Performance

  • Vertical natural frequency of 1/2 Hz or less can be achieved over the entire load range.

  • Horizontal natural frequency is load dependent. 1 1/2 Hz (low horiz. freq.) or 1/2 Hz (ultra low horiz. freq.) or less natural frequencies can be achieved at or near the nominal load.

  • See Performance for a typical transmissibility curve with 1/2 Hz natural frequency.