品名称:8710-0972开口扳手
品牌:安捷伦
型号:8710-0972
规格:Wrench, open end 7/16in and 3/8in
耗材列表查询
Partnumber | 中文名称 | Description |
0100-0090 | 三通接头0100-0090 | Tee, 1/8 inch Brass |
0100-1853 | 安捷伦密封垫0100-1853 | Rotor seal (Vespel, 400 bar, 2 grooves) |
0100-2144 | 黄铜球阀 | 1/8inch Ball Valve |
0100-2298 | 两通/接头PEEK 0100-2298 | Adapter, PEEK int. 1/4-28 to ext. 10-32 |
0101-1416 | 安捷伦密封圈0101-1416 | Rotor Seal 2ps/6pt RC IV, P: A/B |
01018-22707 | 过滤白头01018-22707 | PTFE Frits 5PK |
05988-20066 | 安捷伦毛细管柱螺帽螺母 | Column Nut for MS interface |
07673-40180 | Agilent 07673-40180 螺蚊口瓶的瓶盖 | Diffusion caps for 4ml vials, 12/PK |
0890-1763 | PEEK管线0890-1763 | 1/16 od 0.007 id (0.18mm) 1.5m PEEK tbng |
0905-1175 | 清洗密封垫 0905-1175 | Seal, wash |
0905-1610 | O形圈0905-1610 | O-Ring, 2-010, Perfluoroelastomer, White |
19244-80560 | 可通用的FID喷嘴 | Jet, Adaptable, capillary, 0.29mm ID |
19251-00100 | 扳手安捷伦19251-00100 | Wrench for SSL inlet, nut angled |
19256-80045 | 隔热片垫圈,白色 19256-80045 | Heat Shield Gasket, Perfuoroelastomer |
5021-7107 | 铜管气路管5021-7107 | Copper tubing, 1/8in 12 ft length |
5040-4669 | 启盖器5040-4669 | Ergonomic Manual Crimper for 20mm caps |
5041-2168 | 玻璃过滤头5041-2168 | Glass filter, solvent inlet |
5062-2484 | 冲洗垫片 | Gaskets wash seal 6/PK |
5063-6589 | 密封垫5063-6589 | Plunger seal for 1100/1200 and 1050 2/PK |
5063-6591 | PEEK接头5063-6591 | Fitting-Fingertight PEEK for 1/16-in |
5067-4728 | 密封盖5067-4728 | Seal Cap Assembly |
5080-8750 | 黄铜螺帽 | Fittings 1/8inch Brass 20/PK |
5080-8853 | 石墨密封垫圈5080-8853 | Ferrule, 0.5mm Graphite 0.32 col 10/PK |
5180-4121 | 安捷伦螺帽5180-4121 | Cap, 1/8inch Brass, 6/Pk |
5180-4131 | 安捷伦接头5180-4131 | Reducer, Union, 1/4 x 1/8 Brass 2/PK |
5180-4160 | 5180-4160黄铜三通接头 | Tee, 1/8inch Brass Union 2/PK |
5181-1267 | 5181-1267 自动进样器 | Syringe, 10ul tapered, FN 23-26s/42/HP |
5181-1273 | 自动进样针5181-1273 | Syringe, 5ul tapered, FN 23-26s/42/HP |
5181-3360 | 自动进样针5181-3360 | Syr. 10ul tapered, FN 23-26s/42/HP, 6/PK |
5181-7481 | 5181-7481黄铜三通接头 | 1/8 Nut And Ferrule Set Brass Swagelok |
5181-8830 | 安捷伦螺母5181-8830 | Column nut, universal 2/PK |
5182-0714 | 进样瓶5182-0714 | Vial,screw,2ml,clr,cert,100PK |
5182-0715 | 进样瓶5182-0715 | Vial,screw,2ml,clr,WrtOn,cert,100PK |
5182-0717 | 进样瓶盖5182-0717 | Blue screw caps 100/PK |
5182-0731 | 进样瓶垫5182-0731 | Septa, PTFE/red silicone, 8.7mm 100/pk |
5182-3465 | 梅花螺丝起子5182-3465 | Torx Screwdriver, T20 Size |
5183-4647 | 分流衬管5183-4647 | Liner,split,low prs drop,glswl,tpr,deact |
5183-4711 | 衬管5183-4711 | Lnr,gen purp split/spltls,tpr,glswl,deac |
5183-4757 | 进样口隔垫 | Septa Non-Stick BTO Inlet 11mm 50 pk |
5183-4757-100 | 进样口隔垫 | Septa Non-Stick BTO Inlet 11mm 100 pk |
5188-5367 | 密封垫圈5188-5367 | Gold Plated Inlet Seal with Washer |
5190-1483 | 进样针5190-1483 | Syringe, 10.0 uL, FN, bevel tip |
5190-2293 | 衬管5190-2293 | Liner,UI,splitless,sngle taper,glasswool |
5190-2295 | 分流衬管5190-2295 | Liner,UI,universal,low pressure drop,GW |
8710-0510 | 8710-0510开口扳手 | Tool, wrench 1/4 inch to 5/16 inch |
8710-0803 | 8710-0803开口扳手 | Wrench, open end 7/16in and 9/16in |
8710-0806 | 8710-0806开口扳手 | Wrench, open end 1/2in and 7/16in |
8710-0972 | 8710-0972开口扳手 | Wrench, open end 7/16in and 3/8in |
8710-1217 | 8710-1217螺帽手 | Nut, driver 7mm |
8710-1561 | 8710-1561螺帽扳手 | Nut driver, 1/4in for FID jets |
8710-1709 | 8710-1709 管线切割器 | Cutter, tube |
8710-1807 | 8710-1807梅花起子 | TORX KEY T-20 |
8710-2140 | 8710-2140梅花起子 | Driver, T-10 Torx Key |
8710-2326 | 螺丝刀8710-2326 | 8 mm Hex Key |
9300-0311 | 检漏液MS-SNOOP-8OZ | Leak detector 8oz |
959746-902 | 色谱柱959746-902 | Eclipse Plus C18,2.1 x 50mm, 5um |
G1312-60020 | G1312-60020 主动入口阀阀芯 | Cartridge for active inlet valve 600bar |
G1312-67305 | 毛细管G1312-67305 | SST connecting capillary,60cm, 0.17mm |
G1312-87303 | G1312-87303不锈钢毛细管 | SST Capillary 400x0.17 mm, m/m, ps/ps |
G1313-87201 | 标准自动进样器 | Needle, G1313A Autosampler |
G1322-60001 | G1322-60001真空泵 | AC 3.3Vacuum Chamber, |
G1329-87017 | 针座安捷伦G1329-87017 | Seat assy 0.17mm ID Standard Autosampler |
G1329-87300 | 毛细管G1329-87300 | SST capillary 90cm, 0.17mm id, 1/16 fitt |
G1531-20700 | FID收集极绝缘体 | FID Collector Insulator |
G1531-80560 | Agilent G1531-80560喷嘴 | Jet, Capillary Optimized,0.29mm ID |
G1544-80530 | 安捷伦捕集阱芯G1544-80530 | GC Split Vent Replacement Cartridge,2/pk |
G4513-20561 | 安捷伦色谱柱G4513-20561 | Mounting post for 7693 and 7650 ALS |
OT3-2 | 氧气/水份捕集阱_通用性气相/液相耗材 | Trap, O2/H2O, 1/8in |
广东标谱科技有限公司
仪器网(yiqi.com)--仪器行业网络宣传传媒