UL94燃烧试验箱/燃烧试验机

UL94燃烧试验箱丨燃烧试验机丨燃烧性能试验机丨阻燃性能测试仪丨水平垂直试验机ZYSP-2水平垂直及针焰燃烧一体机

一、产品介绍

A, product introduction

ZYSP-2型水平垂直及针焰燃烧一体机，是根据标准GB-T2408-2008中针对水平垂直燃烧试验的规定与GB5169.5-2008 及GB4706.1-2005中关于针焰燃烧试验的规定而研制的，完全满足国家标准及相关UL、IEC标准的新型综合设备，是目前市场上**一款中和了两类不同试验方法的duchuang性仪器。除设备本身大功能的duchuang性外，该款仪器自动点火、自动计时；同时水平和垂直燃烧式样夹由电机控制，可以自动上下左右移动，不需要人工手拨；以上功能都是别的厂家同类产品不具备的。

ATI-2 type horizontal and vertical needle flame machine, according to the provisions on the needle flame test standard GB-T2408-2008 regulations for horizontal and vertical burning test with GB5169.5-2008 and GB4706.1-2005 and the development of the new type of integrated equipment, fully meet the national standards and related UL and IEC standards, is currently on the market only a neutralization. Two different test methods of original instrument. In addition to the original function of the equipment itself, automatic ignition, automatic timing of the instrument; and the horizontal and vertical combustion style clip is composed of motor control, can automatically move up and down, do not need artificial hand; the above functions are similar products of other manufacturers do not have the.

二、主要技术参数

Two, the main technical parameters

① 针焰部分

Needle flame section

1.针状燃烧器：内孔 Φ 0.5mm ± 0.1mm ，外径 ≤Φ 0.9mm ，长 ≥ 35mm，

1 needle burner: hole diameter of 0.5mm + 0.1mm, the outer diameter of more than Phi 0.9mm, length of more than 35mm,

2.燃烧器施焰角度：0- 45°( 任意调节 )

2 burner flame angle: 0- 45 degrees (optional)

3.施燃时间：0-999.9s±0.1s任意可调 (火焰自动进退，无需动手操作)

3 burning time: 0-999.9s + 0.1s arbitrary adjustable (flame automatic advance and retreat, no hands-on)

4.持燃时间：0-999.9s±0.1s，自动记录，手动暂停

4 holding time: 0-999.9s + 0.1s, automatic recording, manual suspension

5.火焰高度：12mm ± 1mm (带高度测量尺)

5 flame height: 12mm + 1mm (with height gauge)

6.针头高度：大于35mm（内径ф0.5，外径ф0.9）

6 needle height: (diameter greater than 35mm diameter Phi 0.5, Phi 0.9)

7.施燃气体： 95% 丁烷气 ( 可采用瓶装液化石油气)

7 the use of gas: 95% butane gas (can be bottled liquefied petroleum gas)

8.气量大小可调（流量计）

8 air volume adjustable (flowmeter)

9.温度测试范围：0~1000℃

9 temperature test range: 0~1000

10.火焰温度要求：从100℃±2℃升到700℃±3℃的时间在23.5秒±1秒之内

10 flame temperature requirements: from 100 DEG C to + 2 C to + 700 C + + C / C in the time of 23.5 seconds + 1 second

11.测温热电偶：Φ0.5mm进口铠装（K型）热电偶

11 temperature measuring thermocouple: 0.5mm (K type) thermocouple

12.传热铜块：Ф4.0x6.0mm

12: heat transfer copper block with 4.0x6.0mm

13.试验背景：黑背景

13 background: black background

14.试验过程：试验程序自动控制，独立抽风

14 test process: automatic test program control, independent exhaust

② 水平垂直试验部分

Horizontal vertical test section

1.环境温度：室温～40℃； 相对湿度：≤75％；

1 ambient temperature: room temperature to 40 DEG C; relative humidity: less than 75%;

2.供电电压和功率：220V±10％ 50HZ 功率150W

2 power supply voltage and power: 220V + 10%50HZ power 150W

3.本生灯自动点火时间：任意设定

3 automatic ignition time: arbitrary setting

4.本生灯内径9.5mm±0.5mm

4 Bunsen lamp diameter 9.5mm + 0.5mm

5.气源：液化石油气（仲裁时加工业甲烷气）；

5 gas source: liquefied petroleum gas (Arbitration);

6.工作电源 ： 220V AC 50HZ

6 power supply: 220V AC 50HZ

7.计时范围：0~999s 记时精度：10s±0.2s 30s±0.2s；

7 timing range: 0~999s 10s + 0.2S clock precision: 30s + 0.2s;

8.施焰时间 ： 0～999.9S（可调）

8 duration: 0 ~ 999.9S (adjustable)

9.余焰时间 ： 0～999.9S（可调）

More than 9 flame time: 0 ~ 999.9S (adjustable)

10.余灼时间 ： 0～999.9S（可调）

More than 10 burning time: 0 ~ 999.9S (adjustable)

11.燃烧角度 ： 0°、20°、45°可选择

11 combustion angle: 0 degrees, 20 degrees, 45 degrees can be chosen

12.火焰高度 ： 20mm ~ 175mm 可调

12 flame height: 20mm ~ 175mm adjustable

13.火焰温度：（100-1000）℃可调

13 flame temperature: (100-1000) adjustable

14.气体流量 ： 气体流量105ml/min-1000ml/min可调

14 gas flow: gas flow 105ml/min-1000ml/min adjustable

15.燃 烧 灯 ： 灯管内径9.5±0.3mm,长度：100mm±10mm

15 combustion lamp: tube diameter 9.5 + 0.3mm, length: 100mm + 10mm

16.时间装置 ： 能精确到0．5S

16 time device: accurate to 0.5S

17.位置调节 ： 样品夹支架可上下、左右调节，燃烧座可前后调节，调节行程均大

17 position adjustment: the sample holder can be adjusted up and down, left and right, and the combustion seat can be adjusted before and after, and the adjusting stroke is large

三、设计标准：

Three, design standards:

水平垂直燃烧试验部分设计国标：GB-T2408-2008《塑料燃烧性能的测试-水平法和垂直法》

National standard for horizontal and vertical combustion test: GB-T2408-2008 "test of plastic combustion performance - horizontal and vertical method"

水平垂直燃烧试验部分适用标准：UL94-2006、GB-T 5455 、 GB-T13488 、GB-T5169IEC60695-11-3、IEC60695-11-4、IEC60950-1、IEC695-2

Horizontal vertical combustion test part applicable standards: UL94-2006, GB-T 5455, GB-T13488, GB-T5169IEC60695-11-3, IEC60695-11-4, IEC60950-1, IEC695-2

针焰试验部分设备国标：GB5169.5-2008电工电子产品着火危险试验 第5部分：试验火焰 针焰试验方法 装置、确认试验

Needle flame test part of the national standard equipment: GB5169.5-2008 electrical and electronic products fire hazard test fifth parts: test flame needle flame test method, validation test

GB4706.1-2005 家用和类似用途电器的安全通用要求

GB4706.1-2005 General requirements for the safety of household and similar electrical appliances

 UL94燃烧试验箱丨燃烧试验机丨燃烧性能试验机丨阻燃性能测试仪丨水平垂直试验机

CZF-5燃烧试验箱丨燃烧试验机丨燃烧性能试验机丨阻燃性能测试仪丨水平垂直试验机

CZF-3燃烧试验箱丨燃烧试验机丨燃烧性能试验机丨阻燃性能测试仪丨水平垂直试验机