MinusK SM-1 大负载紧凑型隔振器

Low frequency vibration isolator for weight loads from 500 to 4200 lbs. and 1/2 Hz performance vertical and horizontal.

The SM-1 negative-stiffness isolator is the basic building block of the FP-1 Floor Platform and other heavy multiple isolator systems. They require no air or electricity.

This isolator has the same basic features of our all passive, negative-stiffness, manually-adjustable bench top isolators. It offers our very-low frequency isolation performance for payloads of many thousands of pounds.

The SM-1 isolator can be used alone or with any number of additional units to achieve higher capacity systems. They can be arranged in many geometrical configurations to suit your application.

If there is a need, the isolators can be customized to achieve user specific needs. Eg., different horizontal and vertical frequencies, dampening, etc. They can also be made cleanroom and vacuum capatible.

The SM-1 isolators can also be placed on pedestals to increase the height of the isolation system.

See a typical performance curve for this product.

The curve below shows the 1/2 Hz performance of the SM-1.
(The curve below about 2 Hz is not valid. The curve was measured from ambient vibrations and they were too low to get valid results below about 2 Hz. The actual curve should be quite similar to those of our other 0.5 Hz isolators.)

The ambient horizontal vibrations at our facility are too low to measure a valid horizontal transmissibility curve. We expect the actual curve is quite similar to those of our other 0.5 Hz isolators.