Labconco 9015140 WaterPro BT Water Purification System, UV Lamp; 240V-科尔帕默仪器（上海）有限公司

详细信息

Compact benchtop design produces both Type I and Type III (RO) water!

Set up in minutes—simply connect to tap supply, insert the filter pack, and power on
Integrated 6-liter storage tank holds Type III RO-purified water
Quiet—50 dB—and compact enough to be shared between labs, set up on a benchtop, or wall mounted
Integrated UV lamp (185 and 254 nm) removes bacteria, their metabolites, and certain organics

规格与描述

ASTM 水等级Type I and Type III-IV
蒸馏能力10 L/day
最大流速 (L/min)0.5
带紫外灯Yes
电导率阈值< 2000 microseimens/cm
放射源Tap water
TOC 阈值< 2000 ppb
进水要求 (放射源)Tap water
I 型水 (TOC)<5 ppb
I 型水 (细菌)< 01 cfu/mL
进水温度上限 (° F)95
进水温度下限 (° F)41
进水温度上限 (° C)35
进水温度下限 (° C)5
ZD入口压力 (psi)7.3
最高入口压力 (psi)87
ZD入口压力 (bar)0.5
最高入口压力 (bar)6
功率 (VAC)240
描述WaterPro BT Water Purification System, UV Lamp; 240V

包括

Two 1-micron air vent filters, tap-water prefilter screen, 80-in. (203-cm) length of RO-reject tubing, RO-water dispensing ball valve and elbow adapter to connect to the 3-ft (0.9-m) length of dispensing tubing, 10-ft (3-m) length of tubing and hose barb

主要特点

Set up in minutes—simply connect to tap supply, insert the filter pack, and power on
Integrated 6-liter storage tank holds Type III RO-purified water
Quiet—50 dB—and compact enough to be shared between labs, set up on a benchtop, or wall mounted
Integrated UV lamp (185 and 254 nm) removes bacteria, their metabolites, and certain organics

关于该商品的更多信息

WaterPro BT systems deliver up to 10 L/day of ASTM Type I water direct from a tap feed water supply. Ideal for lab applications such as trace elemental analysis, mixing or diluting acid/base solutions, and media preparation.

In addition, ASTM Type III RO-purified water is produced at a rate of 3 L/hr* and stored in an integrated 6-L tank. Ready and waiting for glassware rinsing, reagent preparation, and other noncritical laboratory water needs.

Compact, lightweight, and simple to install, these systems can be easily transported and shared among labs. All water filtration technologies-activated carbon filtration, deionization, and RO-are combined into one convenient twin-cartridge pack that snaps into place (order required filter pack 99290-48 separately).

User-friendly color LCD shows water quality, system status, and maintenance or alarm messages. Plus, it can be tilted for easy viewing from any angle, even if system is wall mounted.

Keypad allows quick access to display settings, water quality unit of measure, resistivity set point, and temperature values. It also provides a means to set the Type I water volume to be dispensed, dispensing time, flow rate calibration, and tank level calibration.

For further purification, choose from two optional final filters that attach to the dispensing valve. The hollow fiber filter removes all particles and bacteria larger than 0.22 micron. The ultrafilter cartridge removes pyrogens (pathogens, RNase, and DNase).

*Feedwater conductivity must be 100 µS or better.

UV Lamp models also include the lamp needed for oxidizing purified water at 185- and 254-nm.