Fischer Technology 605-021 Coating Thickness Gauge-科尔帕默仪器（上海）有限公司

详细信息

Available for sale in the United States, Canada, and Mexico only Portable instruments deliver non-destructive, high precision measurements

All models feature:
Automatic probe recognition
USB port for data transfer to a PC
Large display rich in contrast - 240x160 pixels
Memory for up to 1000 readings

规格与描述

测量方法Magnetic induction
显示240x160 pixels
功率Four AA batteries (included)
深度 (in)1.5
宽度 (in)7
高度 (in)3.5
深度 (cm)3.8
宽度 (cm)17.7
高度 (cm)8.8
描述Coating Thickness Gauge

包括

USB interface cable, carrying strap, and four AA batteries.

主要特点

All models feature:
Automatic probe recognition
USB port for data transfer to a PC
Large display rich in contrast - 240x160 pixels
Memory for up to 1000 readings
Audible signal at measurement acquisition
Displays mean value, standard deviation, min, max, and range
Easy adaptation to the shape of the specimen
Additional corrective calibration using one or two calibration foils
Master calibration for exact characteristics settings for extreme material and geometric properties
Capable of storing the master calibration in the connected probe
Units of measurement can be switched between µm and mils
Adjustable instrument switch-off or continuous operation
Low battery indication
Lockable keyboard/restricted operating mode
Mechanical sliders to cover keys not required for the measurement operation
Various language settings
NOTE: If purchasing calibration item 17101-69 - Gauges cannot be calibrated without a probe, and probes cannot be calibrated without gauges
Probes not included, sold separately

关于该商品的更多信息

These easy to operate, rugged instruments are suitable for virtually any coating thickness measurement requirement. With a wide assortment of plug-in type probes these meters are designed for non-destructive coating thickness measurements according to the magnetic induction method (Deltascope® FPM10), the eddy current method (Isoscope® FPM10), or both methods in one instrument (Dualscope® FPM20). In addition to one user created calibration application, the spectrum of requirements that this series is capable of spans from extensive painted specimens to other very specific and complex measuring challenges.

Deltascope FMP10
Use for the measurement of non-ferromagnetic metal
Coatings such as chrome, copper, zinc, as well as paint,
lacquer, enamel, or plastic coatings on steel and iron.

Available for sale in the United States, Canada, and Mexico only