Digi-Sense 1-Zone Temperature Controller; Limit/Alarm, RTD, 120V/15A-科尔帕默仪器（上海）有限公司

详细信息

A secondary safety device that cut power when a setpoint is achieved

Models available for type J, K, or T thermocouples or RTD probes

规格与描述

最高温度 (° F)149
ZD温度 (° F)0
ZD温度 (° C)-18
最高温度 (° C)65
准确性 0.1% of span, ±1.0⁰F/⁰C
分辨率1⁰, 1.0⁰ or 1.00⁰
控制输入 - RTDYes
控制输出 1Solid-state relay
报警输出Yes
显示类型LED
高度 (in)3.375
宽度 (in)8
深度 (in)6
高度 (mm)85.725
宽度 (mm)203.2
深度 (mm)152.4
功率 (VAC)120
描述1-Zone Temperature Controller; Limit/Alarm, RTD, 120V/15A

包括

6’ detachable power cord and lattice support bracket.

主要特点

Models available for type J, K, or T thermocouples or RTD probes

关于该商品的更多信息

A limit control is a secondary safety device and a must for applications where temperature overshoot can cause serious problems. Used in conjunction with a primary temperature control, the limit control will cut power to its output and turn off all resistive loads if your upper temperature setpoint is achieved. Display shows both limit set point and safe mode/alarm condition at the same time. A manual reset is required if an alarm condition occurs. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.