齿轮泵/MCP-Z Process

Flow rates 1 7020 ml/min (depending on mounted pump-head) Operating panel - 7-button membrane key-pad - LED display Program memories 4 Programming (similar to PLC) 4 individual programs (command sequences) created in a PC can be stored in the pump. The user can run the programs using the pump as a stand-alone unit. Operating modes - pumping by drive speed (rpm) - pumping by flow rate (ml/min) - dispensing by volume (ml) - dispensing by time (0.1s up to 999hrs) - dispensing by volume within a pre-set time - interval dispensing by volume with a pause - interval dispensing by time with a pause - setting the number of dispensing cycles - pause time setting (from 0.1s up to 999hrs) Calibrating functions - for flow rate (ml/min) - for dispensing volume (ml) Motor speed 60 6000 rpm Speed setting digital speed setting (resolution 1 rpm) Speed control closed loop control for pressure independent speed RS232 interfaces - RS232 "in" - for operation control领 via PC - RS232 "out" - for cascading up to 8 pumps Analog input Speed control (05 or 010V / 020 or 420mA) Analog output Speed monitoring (010VDC or 012 kHz) Digital input (TTL level) Start/Stop, autostart, 2 universal inputs Differential pressure max. 5.2 bar / 75.4 psi (depending on pump-head) Motor type DC motor Power consumption 150 W Power supply 100 230 VAC / 50 60 Hz Protection rating IP 65 Depth / Width / Height 260 x 160 x 262 mm (10 " x 6 1/3" x 10 1/3") Weight 6.9 kg (16 lb) Accessories - Progedit software (free download) - Driver for "LabView" software (free download) - Foot switch Special characteristics The rotation direction of Ismatec gear pumps is not reversible !