2012年新品RTC超级自动化进样及前处理平台

CTC公司zuixin推出新品RTC超级自动化进样前处理平台：
1. 多个针座，可自动实现液体进样针；顶空进样针；SPME(固相微萃取）进样针之间全自动快速切换。
2.自动涡旋振荡2ml；10ml；20ml样品瓶。
3.气相液相进样可兼备，通用型设计；最大液体针容量可达10ml，用来做稀释衍生化等前处理再好不过。
4.样品容量及模块容量有极大提升。
5.内置微量样品触底感应装置可全面保护针，5微升样品可进1微升达3次。另有针头快速冷却功能。
6.三维读码器精致精确。
7.软件界面简单明了，方便实用。并可实现样品预处理，极大缩短总分析时间。
8.方法编辑器方便您设计实现新的方法。只有想不到，没有做不到。

PAL Robotic Tool Change The possibilities are endless -the limit is your imagination

Sample Prep Automation Systems
The PAL RTC with its Robotic Tool Change is the logical (r)evolution of the successful
PAL-xt product line. Finally Sample Prep prior to Chromatography no longer is the
bottleneck with the PAL RTC you automate your sample prep and sample injection -
all in one single instrument.
The PAL RTC is the new platform for efficiently automating complex sample preparation
steps. With its automatic tool change capabilities the PAL RTC increases productivity and
widens the application range by using up to six different syringe types even in single
cycle. The Autosampler robotically changes between Liquid Injection, Headspace and
SPME methods within one sample list and without need of manual operation in less
than 30 seconds. The integrated Vortex Mixer and different syringe volumes automate
effectively your sample preparation steps.
Liquid-liquid-extraction, derivatisations, standard addition and dilution by manual
hand领 was yesterday with the new PAL RTC you have the right tool(s) available
when you really need it.
The PAL RTC is controlled by the unique PAL Sample Control Software. It is applicable
with more than ten CDS and MS-Data Systems.
With the PAL RTC the possibilities are endless the limit is your imagination.

With its robotic tool change capabilities the PAL RTC increases your laboratory
productivity and widens the application range of one single instrument by using
up to six different tools, even in one single cycle.
Automatic, precise and repeatable sample prep steps provided by Tool Change are:
Sequential Dilution
Calibration Dilution
Standard Addition
Derivatisations
Especially for GC & GC/MS application the PAL Tool Change offers a robotically switch
of injection modes Liquid Injection, Headspace and SPME within one sequence
without need of any manual operation.

Fast Cold Needle Injection
for GC
Faster Injection down to 100ms for
reduced discrimination in Split and
Splitless Injection

Microsample injection
bottom sensing
The built-in vial bottom sensing
allows the injection of small sample
volumes even out of only a
few microliter sample available
Inject up to 3 x 1μl out of only
5μl total sample volume

More vial capacity
Due to extended working range for y-axis (255mm)
and z-axis (310mm) up to 50% more samples can be
handled without using more space on the x-axis.
Additional capacity per tray holder:
2ml vials 162 instead of 98
10/20ml: 60 instead of 32
Microtiter plates: 3 instead of 2
Up to 13‘824 samples (384 MT) or 972
2ml vials can be processed on one PAL RTC

Vortex Mixer
Enables efficient mixing for liquid homogenization
and extraction steps.
Magnetic transportation
Standard vial sizes: 2ml / 10ml / 20ml
1 additional slot for custom specific vials
Provides efficient 2-phase mixing
Barcode Reader
This unique barcode reader allows the PAL RTC
Autosampler to read the barcode labels on 2, 10 and
20ml vials regardless of their position on the vials.
Therefore it ensures highest process safety and
traceability.
Barcode reader for horizontal barcode lines on vials
Barcode reader with 2 scan modules allows
identification on vials in any orientation
Standard vial sizes: 2ml / 10ml / 20ml

PAL RTC Valve Options
Universal Valve Drive that supports all applications
including sample injection, column switching such as
online LC-LC/MS or online SPE-LC/MS, Multiplexing,
column selectors and many more.
Valve Drives available for VICI/Valco and Rheodyne valve
types
Injection port bottom sensing: no more teaching of the
needle penetration in injector
Constant Force Technology to reduce dead volume
during injection
UHPLC: up to 50% faster switching times for optimum
system performance and prolonged column life time
Stackable valve drives reduce the space requirements
and allow any flexible configuration

PAL RTC Sample Control Software -
seamless CDS integration
Method Editor
Applicable with more than ten CDS, methods can be
prepared in straightforward simple way by using
prepared tasks. The sample list can be created with
the methods in a flexible but still simple way.
Subsequently it can be passed on to the analytical
systems.
Applicable with most common CDS systems.
Data system compatibility
Agilent ChemStation Agilent EZChrom
Agilent MassHunter AB Sciex Analyst
Thermo Xcalibur Thermo Chromcard
Thermo ChromQuest DataApex Clarity
Waters Empower 2
Time schedules
After submitting the sample list the software
automatically calculates the optimized schedule for
the run times. The result of this calculation will be
shown graphically. The acutal status will always be
displayed either in form of a gaph or in a table. By
clicking on Execute the first of the calculated
schedules will be started. Further schedules will be
started when the previous one is finished. Priority
Samples can be added at any point in time during
the run.
Intelligent Automation for Sample Prep
The PAL Sample Control Software is the new control
platform for efficiently automating any sample
preparation steps with the PAL RTC robot systems
and will be delivered with each PAL RTC system.
Numerous interfaces, for example to Xcalibur,
ChemStation, Analyst and MassHunter, guarantee
seamless integration into existing CDS datasystems.
The software exchanges data with other systems and
controls all of the processes. On the basis of intelligent
time management the software considerably increases
the throughput of the analytical systems. While the
analysis is running the next sample preparation is
already taken place. The software truly simplifies life
for users since many of the tasks such as the creation
of methods or sample lists are very easy.

The setup and instrument configuration
can either be done by using the Handheld
Terminal or the PC Terminal software.