IKA 真空 VC 10 pro

VC 10 pro Valve-controlled, universal vacuum controller for controlled evacuation of air (gas) from laboratory equipment, as well as for classical separation, filtration or drying tasks in the laboratory. The controller is ready-to-use in numerous applications and can be easily installed.

VC 10 pro can be used with all standard vacuum sources. The use of multiple controllers with one vacuum source is possible.

Features:

• On/off regulation of multiple vacuum sources
• Automatic boiling point detection
• Integrated solvent library: Helps to set the correct parameters for example in evaporation processes with rotary evaporators
• Graph function
• Connection for external temperature sensor: temperature value is shown on display
• Valve cleaning function for long service life
• Integrated ventilation valve for simple pressure equalization and aeration with inert gas after process completion
• VENT short key button allows pressure equalization during a running process
• Program function: up to ten user-defined programs can be saved, with up to ten pressure/time sequences
• USB / RS232 interfaces for connection with the laboratory software labworldsoft®
• Electronic control system for improved process efficiency and higher solvent recovery rate
• High energy efficiency thanks to device-to-device communication (vacuum controller to recirculating chiller)

For additional safety for users and environment, the use of the VSE 1 vacuum safety emission condenser is recommended, which prevents solvents from being released into the room air. The VSE 1 is available as an accessory.

技术参数

入口连接直径	8 mm
出口连接直接	8 mm
放气口管径	8 mm
输入压力	1 - 1050 mbar
沸点测定功能	是
溶剂数据库	是
开关式压力控制	是
模拟速度真空控制	是
显示屏	TFT
压力单位/刻度	mbar, hPa, mmHg, Torr
真空传感器	是
真空传感器类型	陶瓷Al2O3
压力传感器的ZD压力	1.6 bar
测量范围(JD)	1 - 1100 mbar
控制范围	1 - 1100 mbar
压力显示精度	1 mbar
测量不确定性	1 mbar
介质温度(气体)	5 - 40 °C
真空阀	是
排气阀	是
外接温度传感器接口	PT1000
温度单位	℃/℉
温度范围	-10 - 200 °C
温度测量精度	1 K
温度测量精确性	±1 K
计时器	是
最小设置时间	1 s
ZD设置时间	6000 min
真空速度控制界面	VACSTAR
物料接触部分材料	Al2O3, PTFE, FPM, PPS
外壳材质	PBT
紧固件	支架/夹具
紧固件直径	16 mm
自动模式	是
手动模式	是
泵%模式	是
程序模式	是
图形功能	是
Chiller control	是
Vacuum leakage test	是
外形尺寸	95 x 150 x 110 mm
重量	1.5 kg
允许环境温度	5 - 40 °C
允许相对湿度	80 %
DIN EN 60529 保护方式	IP 20
RS 232接口	是
USB接口	是
电压	100 - 240 V
频率	50/60 Hz
仪器输入功率	24 W
仪器输入功率 待机	2 W
直流电压	24 V=
电流消耗	1000 mA