氙弧灯耐候试验箱,电池片预衰减试验箱-上海泊睿科学仪器有限公司

详细信息

仪器简介：

1) 中/英文软件

2) 加装DayLight滤镜可用于光伏材料光老化试验, 更换AM1.5滤镜后可用于光伏电池预衰减试验.
BR-UL-Xenon Ultraviolet Light Exposure Chamber
Implementation of standards:
① UL 1703-2008 Polymeric materials (quote UL 746C-2006“Ultraviolet Light Exposure”, spectral distribution conform to ASTM G155-2005)
② VDE 0126-5:2008 Junction box “Weather resistance test”, VDE 0126-3:2009 Connector “Weather resistance”，spectral distribution conform to ISO 4892-2-2006
③ ETAG 002-2000, ASTM C1184-2000 Silicone sealant UV age test, spectral distribution conform to ASTM G155-2005
④ General specification of crystalline silicon solar cell for terrestrial application: Cell maximum power in early light attenuation ratio test

Effective area of irradiation: 500×400mm
Measurement point or range:
300~400nm, 290~800nm, 340nm/nm, 420nm/nm
Irradiation uniformity: better than ±10% at 312×312mm
Irradiation deviation: ±2W/m²@300~400nm
Temperature control range: RT~90°C±2.5°C
Air temperature control range: 20~80°C
With refrigeration compressor, spray system
Irradiation, temperature and spray: Program control
Irradiation and temperature closed loop control…

Measurement point or range: 300~400nm, 290~800nm, 340nm/nm, 420nm/nm
Irradiation uniformity: better than ±10% at 312×312mm
Irradiation deviation: ±2W/m²@300~400nm
Temperature control range: RT~90°C±2.5°C
Air temperature control range: 20~80°C
With refrigeration compressor, spray system
Irradiation, temperature and spray: Program control
Irradiation and temperature closed loop control...

① DayLight filter: for junction box and connector test, spectral distribution conform to ASTM G155 and ISO 4892-2 requirements.
② AM1.5 filter (option): for cell maximum power in early light attenuation ratio test, spectral distribution conform to IEC 60904.9 Class C requirements.

Spectral after filter comparison ASTM G155:

Wavelengh range	Transmission after filter	Benchmark solar	ASTM G155	Radiation precent after filter
(<290nm)	0.01%	0~0.15%	0~0.15%	0.02%
(290~320nm)	2.85%	5.80%	2.6~7.9%	4.34%
(320~360nm)	23.90%	40.00%	28.3~40.0%	36.46%
(360~400nm)	38.79%	54.20%	54.2~67.5%	59.18%
Total UV	65.54%	100.00%	100.00%	100.00%

UL 1703 (UL 746C) test results discriminant:

Physical-property consideration	Material test method
Functional support	Tensile strength or Flexural strength (The ultraviolet-exposed side is to be in contact with the two loading points when using the three-point loading method.)
Impact resistance	Tensile impact, Izod impact, or Charpy impact