企业性质
入驻年限第9年
PHYS TECH GmbH RH2035 霍尔效应测试仪器
1. | 设备名称: | 霍尔效应测试仪 |
2. | 功能描述: | 测量半导体薄膜中载流子类型、载流子浓度、迁移率、电阻率、霍尔系数等参数 |
3. | 技术参数: | |
3-1 | 测试范围: | Si, SiGe, SiC, GaAs, InGaAs, InP, GaN (N Type & P Type)等材质的半导体薄膜中载流子类型、载流子浓度、迁移率、电阻率、霍尔系数等参数 |
3-2 | 磁场: | |
3-2-1 | 磁场强度: | 1T 电磁体 |
3-2-2 | 磁场类型: | 电磁体 |
3-2-3 | 磁场均匀性: | 磁场不均匀性<±1 % 10年内磁场变化<±0.2% |
3-3 | 温 度: | |
3-3-1 | 温度区域: | 77K(液氮温度)或室温 |
3-4 | 电阻率范围: | 1 Ohm*cm ~10 M Ohm*cm |
3-5 | 电阻范围: | 0.1 m Ohms ~10 G Ohms |
3-6 | 载流子浓度: | 107~1021cm-3 |
3-7 | 迁移率: | 10-2~107 cm2/volt*sec |
3-8 | 输入电流: | |
3-8-1 | 电流范围: | 1000 pA~10mA |
3-8-2 | 电流解析度: | 25 pA (lowest range) |
3-8-3 | 电流精度: | 2% |
3-9 | 输入电压: | |
3-9-1 | 电压范围: | ±10V |
3-9-2 | 电压分辨率: | 1μV |
4. | 仪器特点: | |
4-1 | Automatic contact check 自动接触检查(欧姆接触) | |
4-2 | Routine and enhanced software 常规和增强软件 | |
4-3 | Differential resistivity measurements by I/V-curves I/V曲线测试电阻率差异 | |
4-4 | Misalignment voltage compensation 失调电压补偿 | |
4-5 | Correction of slow sample drift voltage, especially for ZnO, 修正慢样品漂移电压,特别是氧化锌 | |
4-6 | Automatic field calibration 自动现场标定 | |
4-7 | Large concentration and resistivity range 大浓度和电阻率范围 | |
4-8 | Flexible, modular hardware 灵活的模块化硬件 | |
4-9 | Support of various magnets, for example BioRad HL 5200 支持多样磁场 | |
4-10 | Support of various temperature controllers 支持各种温度控制器(支持客户自行升级变温系统) | |
5 | 硬件 | |
5-1 | The standard system consists of a bench top electronic system, a small magnet and a sample stage for room temperature and LN2 measurements. 标准系统包含电子测试系统、磁场和两个温度区域的测试平台(室温和液氮温度) | |
5-2 | The electronics include the current source, the voltage measurement part, the contact switching module and the IEEE or RS232 interface. It is completely micro processor controlled. 电子测试系统包括由单片机控制的电流源、电压测试、接触开关模块、IEEE或RS232接口 | |
5-3 | The contact switching module is designed to allow all possible measurement configurations. 接触开关模块支持所有用户用于其他的配置(用户可以采用制冷机做变温霍尔测试) | |
5-4 | The current source has adjustable limits for voltage and/or power. {+++} 电流源具有可调电压和/或电源的限制 | |
5-5 | Voltage measurement provides different input amplifiers optimized for either low current or low voltage applications. 电压测量提供了不同的输入放大器或低电流或低电压应用的优化。 |