FLUKE-1750/ET Three-Phase Power Recorder with four 400A current probes and PC tablet

品牌：美国福禄克
型号：
产地：美国
供应商报价：面议
产品分类：功率计/功率探头

科尔帕默仪器（上海）有限公司

企业性质授权代理商

入驻年限第5年

营业执照已审核

同类产品功率计与功率分析仪(69件)

详细介绍
相关产品
您可能感兴趣的产品

详细介绍

Never miss hard-to-find issues while monitoring critical equipment

Eliminate costly downtime by capturing power quality events to uncover equipment malfunction
Automatically store complete power system data on the memory card or export via the Ethernet connection
Monitor all measurements on every cycle with outstanding accuracy and resolution
Set up in minutes without a PC and with self-identifying current probes and single-lead voltage connections

规格与描述

DC 最小值 (V)-1000
DC 最大值 (V)1000
DC 电压精度±0.5% reading ±0.2% full scale, above 50 V dc
AC 最大值 (V)1000
AC 电压精度±0.2% reading ±0.1% full scale, above 50 V rms
AC 最大值 (A)400
AC 电流精度±(0.1 % full scale 0.5 % reading current sensor accuracy)
最小频率 (Hz)42.5
最大频率 (Hz)69
频率精度±10 mHz (10 to 110% of range, with sine wave)
真均方根值True rms calculated continuously: every cycle, every 1/2 cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by IEC 61000-4-30
ZD温度 (° F)32
最高温度 (° F)104
ZD温度 (° C)0
最高温度 (° C)40
内存2 GB SD Card
接口Windows 10 tablet "front panel interface" (included)
测量Simultaneous digital sampling of voltage and current. Digital PLL synchronized sampling, internal frequency reference used during voltage drops.
安全等级EN 61010-1 2 nd Edition; 2 000
宽度 (in)8.5
高度 (in)12.2
深度 (in)3.5
宽度 (cm)21.5
高度 (cm)31
深度 (cm)8.9
描述Three-Phase Power Recorder with four 400A current probes and PC tablet

主要特点

Eliminate costly downtime by capturing power quality events to uncover equipment malfunction
Automatically store complete power system data on the memory card or export via the Ethernet connection
Monitor all measurements on every cycle with outstanding accuracy and resolution
Set up in minutes without a PC and with self-identifying current probes and single-lead voltage connections

关于该商品的更多信息

These Fluke 1750 three-phase power recorders allow you to easily and accurately measure and validate voltage and current on three phases, neutral, and ground of critical equipment. All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values.
Safely capture power quality events without needing batteries or external power supplies. These recorders only require single-lead voltage connections which enhances safety while also allowing quick setup. Certified to meet the strictest safety standards, these comply for use in CAT IV-600 V and CAT III-1000 V environments.
Every cycle on every channel is simultaneously sampled to provide you with a complete analysis of power quality, harmonics, power and energy. Cross-channel current and voltage triggering will capture event data on all input channels, no matter which channel triggered the event. This way you will never miss capturing a disturbance again.
The three models that include the Windows® 10 tablet allow analysis to be performed in the field with the use of the Fluke Power Analyze software. Voice, data, and picture annotations can be made to flag important points on the tablet as you are recording measurements. The easy-to-use interface lets you to view data the way you want, and even modify thresholds after data is recorded.